SUMMARY This research work includes three main experimental stages. The first stage includes the production of foamed concrete. It is divided into two parts; in the first, mixing design (determination of the proportions of the raw materials) according to the required density was presented and in the second part, the mixing procedure has been illustrated. The second stage includes preparation of samples,(i.e. molding, finishing surface, removal from molds and curing). The third stage includes several tests to estimate properties of the final product and factors influencing them . These properties include density , compressive strength , splitting tensile strength and flexural strength. For foamed concrete with 800 kg/m3 density, the 28-day compressive strength is from (1.334 MPa) to (2.323 MPa), while with 1600 kg/m3 density, the strength is from (7.015 MPa) to (9.591 MPa). For 1600 kg/m3 density foamed concrete, the 28-day flexural strength range is from (1.08 MPa) to (2.205 MPa).
ABSTRACT:The resistance of concrete to sulfate attack is considered as one of the important factors for concrete durability.The effect of SBR polymer on sulfate resistance of concrete is investigated. Both internal and external sulfate attack are considered.Internal sulfate attack was made by adding gypsum to raise the sulfate content of sand to that of Ramadi city soil (2.17%), while the external sulfate attack was made by adding chemical materials (MgSO4.7H2O, Na2SO4, CaCl2.2H2O, NaCl) to tap water to convert it into water similar to groundwater of Ramadi city.The laboratory tests were compressive and flexural strength, modulus of elasticity, slump, ultra-sound velocity and total percentage of sulfate after exposing to attack for different ages. It was found that the compressive strength of reinforced normal concrete (RNC) for ages (7,28,90,180) days respectively were (20,28,11.166,7) MPa, the compressive strength of polymer Portland cement concrete( PPCC) with polymer/cement ratio( P/C)=5% (PPCC5) were (21.83,32.666,12.766,8.733) MPa and for PPCC with (P/C)=10% were (24.166,35.866,15.533,11.366)MPa.While the flexural strength of RNC for different ages (7,28,90,180) respectively were (3.953,3.7,1.68,11.305) MPa, the flexural strength of PPCC5 were (4.05,5.025,2.13,1.605) MPa and for PPCC10 were (4.43,6.375,2.43,1.92) MPa.The static modulus of elasticity at age (28) days for (RNC) was (37.4) GPa , for PPCC5 was (9.7) GPa and for PPCC10 was (13.63) GPa.Slump for (RNC) was (155) mm, for PPCC5 was (142) mm and for PPCC10 was (75) mm.T he ultra-sound velocity of RNC for ages (7,28,90,180) respectively were (4.2,4.445,4.203,4.53) Km/sec , for PPCC5 were (4.36,4.646,4.53,4.176) Km/sec and for PPCC10 were (4.437,4.837,4.656,4.52) Km/sec.It was found that (PPCC10) has higher resistance to sulfate attack than (PPCC5) and (NRC). The thesis refers to necessity of polymer to improve the resistance of concrete to sulfate attack although if the sulfate percentage raise to more than (0.5) % which represents the maximum limit of sulfate percentage in I.O.S No. 45-1970.
Abstract In this study, a theoretical analysis is presented to estimate the in-plane large displacement elastic stability behavior of structures having non-prismatic members of linearly and nonlinearly varying sections resting on elastic foundation (Winkler type) and subjected to static loads applied at joints only. The analysis adopts the beam-column approach and models the structural members as beam-column elements resting on distributed springs. The formulation of beam-column element is based on Euler approach allowing for the influence of the axial force on bending stiffness. Changes in member chord length due to axial deformation and flexural bowing are taken into account. The stability and bowing functions are estimated using methods of finite differences and finite segments. Also, approximate results have been obtained by using approximate stability and bowing functions of linearly and nonlinearly tapered members resting on elastic foundation. A computer program has been coded in QB language to carry out the proposed analysis of structures with prismatic or non-prismatic members of linearly and nonlinearly varying sections resting on elastic foundation. As a result of this study; the only difference between the analysis of non-prismatic members resting on elastic foundation and those which are not, when adopting the beam-column approach, is represented in the stability and bowing functions, and this is reflected directly on the tangent stiffness matrix.