A series of experimental tests were carried out to investigate the behavior of high strength concrete filled double skin steel tubular (HSCFDST) columns. Fourteen column specimens were tested in the present study, taking into account the effects of the shape of column cross section (circular or square), the hollowness ratio, and the slenderness ratio. For comparison, two of the tested specimens were filled with normal strength concrete. It was seen that the ultimate axial strength of the square HSCFDST columns is greater than that for circular ones, in spite of that the sectional properties were approximately equal. Also, it was found that for both circular and square column specimens, the ultimate axial strength of HSCFDST columns was inversely proportional to their hollowness and slenderness ratios. CFDST column specimens filled with high strength concrete compared with those filled with normal strength concrete increased stiffness and ultimate axial strength, but give unexpected results for the ultimate axial strength, therefore the suitable choice for the section properties of the inner steel tube is required. The experimental results and analytical approach that developed by other researchers shown good agreement.
This paper presents the numerical study to simulate the flexural behavior of normal strength, high strength and hybrid reinforced concrete beams, under two points load with two different reinforcement ratio. The hybrid beam consists of two layers: the compressive layer is made of high strength concrete, and the tension layer is made of normal strength concrete. The simulation was done with a finite element model using the commercial finite element code, ANSYS (v.9.0). The concrete component material is modeled, the internal steel reinforcement modeled using ''LINK'' elements. The modeled behavior shown a good agreement with the experimental data. The maximum percentage difference in ultimate load-carrying capacity is 8% at the ultimate load level.Analytical study also included the effect of increasing the depth of the normal strength concrete for the hybrid reinforced concrete beam and the effect of increasing the compressive strength for high strength concrete and normal strength concrete respectively on the behavior and the load carrying capacity of the hybrid reinforced concrete beams.
This study program has been arranged to test the behavior of punching shear for concrete slabs reinforced by an embedded glass fiber reinforced polymer (GFRP) reinforcements. However, the shear resistance of concrete members in general and especially punching shear of two-way RC slabs, reinforced by GFRP bars has not yet been fully investigated. Seven decades ago, many researches have been carried out on punching shear resistance of slabs reinforced by conventional steel and several design methods were created. However, these methods can be not easily applied to FRP-reinforced concrete slabs due to the difference in mechanical properties between (FRP) and steel reinforcement. sixteen specimens are to be cast in lab within two categories of reinforcements such as GFRP and equivalent steel reinforcements. In addition, based on experimental data obtained from the author’s study and ACI model, the paper performed an evaluation of accuracy of proposed model. The results from the evaluation show that the ACI-formula gave inaccurate results with a large scatter in comparison with the test results of this study. A new design formula can be proposed for more accurate estimation of punching shear resistance of (GFRP) specimens.
The Impact of silica fume existence and its content with the duration of curing on concrete compressive strength (ordinary and high) has investigated experimentally. Two mixture sets were done in this work to examine the concrete ordinary and high strength. Every set involved four mixtures with varied silica fume proportions as a substitution of cement with (0, 5, 10 and 15 percent). Ninety-six cubes of concrete were prepared and cured by immersion in water to the required age (7, 28, 90 and 150 days). In ordinary concrete and high strength concrete, the results demonstrate that when silica fume used as a substitution with 15 %, the compressive strength of concrete gave the highest value. As compared with concrete having nil content of silica fume, the earned strength for high compressive concrete consisting of silica fume was relatively less than the corresponding ordinary concrete strength. However, continuously curing with water after 28 days produced a considerable increase in the compressive strength of concrete; such an increase in compressive strength was greater in the existence of silica fume