Abstract:-This investigation studies the mechanical characteristics of carbon fiber reinforcedlight weight aggregate concrete, containing different percentages of fiber. The effect ofusing high range water reducing agent (SP) with 8% silica fume (SF) and 8% highreactivity Metakaolin (HRM), as a partial replacement by weight of cement, on thebehavior of (LWA) concrete is also studied.This investigation was carried out using several tests. These tests were workability freshand hardened density, compressive strength, splitting tensile strength and modulus ofrupture. Tests were performed for specimens at ages of (7,28,60,90 and 180) days . Thetest results indicated that the inclusion of carbon fiber to the light weight concrete mix didnot affect the compressive strength significantly, while the splitting tensile strength andthe modulus of rupture were improved significantly. The addition of silica fume andmetakaolin improves the compressive, splitting tensile , and modulus of rupture strengthsof carbon fiber light weight concrete. The average improvement was about (26.5%, 71%and 73 %) respectively for carbon fiber LWA concrete containing silica fume and (28%,72% and 75%) respectively for carbon fiber LWA concrete containing high reactivitymetakaolin.
This research work includes production of new type of light weight concrete and studies the mechanical and thermal properties. Several proportions of raw materials were used to produce this type of concrete. This study is intended to produce light weight concrete with low thermal conductivity so that it can be used for concrete masonry units. Polystyrene aggregate was added as percentages by weight of cement to improve the thermal properties of this type of concrete .Mechanical , and thermal tests with difference ages were made in this work .For polystyrene concrete with polystyrene cement ratio (p/c) of (2.67 – 6 )% , the28-day compressive strength range is from (4.31 – 2.67)MPa, flexural strength range is from (3.05-1.719 ) MPa , density range is from ( 1493-1213 ) kg/m 3 ,and thermal conductivity range is from ( 0.91-0.782)% as a percentage by that of reference mix. The study show suitability of this type of concrete to be used in concrete masonry units of non-bearing walls.
Research in Iraq has expanded in the field of material technology involving the properties of the light-weight concrete using natural aggregate. Research work on porcelinite concrete has been carried out in several Iraqi Universities. However , despite the great practical importance of such concrete in construction fields ,very limited amount of work has been carried out to investigate the (shear strength) of structural light-weight aggregate concrete , therefore it is important to study the properties and their structural behavior. In this work an attempt is made to study shear strength of porcelinite reinforced concrete beams without (stirrups). The results have been compared with the results predicted by the equations of International codes, such as ACI 318M-02, BS-8110 codes and with some authors' equations as for, Hanson. The experimental results also have been compared with results obtained from normal weight concrete specimens that had been prepared for this purpose. The study mainly deals with the structural behavior of porcelinite reinforced concrete beams without stirrups, especially the shear strength, besides, the short-term deflection, strain and cracks. The variables are, compressive strength ranging between (23.0-29.8) MPa and reinforcement percentages ranging between (0.0174-0.0307). A total of 12 beams are tested; (9) are light weight concrete beams without stirrups and (3) are normal weight concrete beams, also without stirrups. The dimensions of all those beams are 135 * 260 * 1800 mm. The structural results more often, give values 2.9 times more than that of (ACI-02)
The researches in Iraq has expanded in the field of material technology involving the properties of the light weight concrete using natural aggregate aviable in westran of Iraq. Researches work on porcelinite concrete has been carried out in several Iraqi Universities. The study is deals with mechanical properties of porcelinite aggregate concrete by casting (273) different specimens. These properties are, compressive strength, flexurale strength, splitting strength, static modulus of elasticity and absorption. The results indicated that the structural light weight aggregate concrete produced from local porcelinite aggregate is suitable to used as a structural concrete, it can produce structural light weight concrete of compressive strength varies from (23.0 to 29.8) MPa with the density ranges from (1745 to 1855) kg/m3, by using cement content about (550 and 650) kg/m3.Such concrete exhibited good mechanical properties. It gave the values of splitting tensile strength, modulus of rupture and modulus of elasticity, 75%, 90% and 60% from those of normal weight concrete respectively owning the same compressive strength and meeting the requirement of ACI-213
The main objective of this study is to get more information about the flexural behavior of composite reinforced concrete slabs using two layer of concrete, first layer is light weight concrete (LWC), and second layer is normal weight concrete (NWC), through an experimental tests carried out on five samples different in their details and the position of the concrete type layer within the slabs. In this study, simply supported slabs subjected to one point load were adopted. The effect of concrete grade for the (LWC) was also studied. The light weight coarse aggregate which that used in this study is the expanded light clay aggregate (LECA). Using this type of light aggregate in concrete leads to reducing the weight of composite concrete slabs about (11.4%-17.5%). In this study, one grade of NWC was used of (25 MPa), while three of grade types were adopted for LWC (25 MPa, 18 MPa, 15 MPa).
Abstract:This research studies the effect of high temperature which is reached to 600 °C onstructural lightweight and normal weight concrete. Lightweight concrete mix designedaccording to ACI committee 211-2-82 with mix proportion 1:1.12 :3.35 by volume .Thewc ratio equal to 0.5 by weight and cement content 550 kgm3. Mix proportions ofnormal weight concrete were 1:2:3 by weight with cement content 400 kgm3 and samewc. The design compressive strength at 28 days of normal weight concrete (NWC) andlightweight concrete (LWC) were 34.7 MPa and 22.62 MPa respectively. Compressivestrength tests were performed on 100 mm cubes exposed to high temperature 100,200,400and 600 °C. The normal weight concrete and light weight concrete test specimens wereexposed to high temperature for 10 minute suddenly at the required degree. Moreover,light weight concrete test specimens tested after graduate exposure to high temperaturereaching to the required degree with and without drying to examine the effect of moisturecontent.The results indicated that the structural lightweight concrete exhibits approximatelysimilar compressive strength loss compared to normal weight concrete up to 600 °C at 28days in graduate exposure .The percentage of reduction on compressive strength was30% in lightweight concrete compared to 28% in normal weight concrete at 600 °C .Insudden exposure to high temperature ,the opposite behavior was noticed .The percentageof reduction on compressive strength was 64.4% in lightweight concrete at 600°C .Drying of lightweight concrete specimens before graduate exposure to high temperaturessignificantly reduce the loss of compressive strength.
This study addressed some important tests for concrete including thermal, acoustic insulation and some mechanical behaviour of concrete containing granular Polyvinyl Chloride (PVC) waste as a sand replacement. The PVC waste was collected from a plant of manufacturing PVC doors and windows, was used to replace some of fine aggregate at ratios of 2.5%, 5%, 7.5%, 10%, 12.5% and 15% by weight Properties that studied are thermal conductivity, acoustic insulation slump, fresh density, dry density, compressive strength, flexural strength, and splitting tensile strength. Curing ages of 7, 28, and 56 days for the concrete mixtures were applied in this work. From the results of this study, it is suggested that using of 12.5% fine PVC as a sand replacement by weight can improve thermal insulation to about 82.48% more than concrete without plastic waste Acoustic insulation is about 43.09% more than reference mix and it satisfies the requirement of ACI 213R 2014 for structural lightweight concrete.